Tenant Cloud Network VPN Connections Quick Start

Step 1: Creating a VPN Gateway

Last Updated At: 2025-10-30 15:54:34

  1. Log in to the cloud platform and choose Cloud Products > Cloud Computing & Networking > Virtual Private Cloud to go to the VPC console.

  2. In the directory on the left side, choose VPN Connection > VPN Gateway to go to the VPN Gateway management interface.

  3. Select a region and click Create. > Note: If Create is grayed out and No Virtual Private Cloud Available is displayed when you move your mouse pointer over it, before creating a VPN gateway.

  4. In the pop-up Create VPN Gateway dialog box, fill in the VPN gateway name (such as TomVPNGw), select the network it belongs to and bandwidth limit, select IPsec VPN as the VPN type, and select the Carrier.

  5. After setting the parameters, click Create. The system will allocate a public network IP address such as 203.195.147.82 to the created VPN gateway.

    Note:

    VPN gateways with bandwidth above 100 Mbps should use DPDK hosts. If the option for bandwidth above 100 Mbps is not displayed on the Purchase page, contact the cloud platform's technical support personnel for assistance.